Radio Remote Control FFB2000-Pro
Page 8 of 9
X-Floc Dämmtechnik-Maschinen GmbH
Rosine-Starz-Straße 12 · 71272 Renningen · Germany
Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com
Technical Data
Receiver power supply. 20-28V DC
Receiver power input 12mA bei 24V
Hand-held transmitter power
supply.
3.6V DC
Rechargeable battery type NiMH-rechargeable battery, Type AAA, quick charge capable (1C), Capacity 700 –
1000 mAh.
Examples: Sanyo Eneloop HR-4UTGB, Panasonic HHR-80AAAB, Duracell Stay-
charged AAA
Rechargeable battery life approx. 3 years
Operating time Approx. 30 depending on operating intensity.
Transmitter power input <0.15mA with 3.6V
Supply voltage optional 6V DC with RS 485
Charging voltage input 12V DC (9-16V DC) / 0.5A
Operating temperature range -20°C - +65°C
Radio frequency: 4 channels, manually adjustable 433.62MHz, 433.82 MHz, 434.02MHz und
434.22MHz
Radio peformance <= + 10 dBm to 50 Ohm
Aerial connection 50 Ohm
Communication Bidirektional, GFSK modulation
Enable communication Tune the hand held controls
Baud rate 19200 b/s
Interface RS 485 (has priority over radio communication)
Outputs 3 digital outputs und 2 analogue outputs, 0-15V
Moisture content 15% to 95% rel., no condensation
Protection class IP 40
Range With no interference, >100 m
To Next Page
Loading...