X-FLOC FFB2000-Pro - Troubleshooting and Range Tips; Radio Control Interference and Solutions; Optimizing Radio Range; Battery Capacity Check and Storage

Radio Remote Control FFB2000-Pro
X-Floc Dämmtechnik-Maschinen GmbH Page 9 of 9
Rosine-Starz-Straße 12 · 71272 Renningen · Germany
Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com
General hints for radio control, trouble shooting
Wrong: Rad
io shadow and metal objects can
interfere the radio connection
Right: Direct r
adio contact improves the
radio connection
Wrong: Other devices can interfere the radio
conne
ction.
Right: C
hoose channel in such way, that
interfe
rences are avoided or use a connector
cable between sender and r
eceiver.
Wrong: Metal concrete walls and similar
obstruct the radio connection.
Right: Place the receiver in such position,
that the radio connection is not obstructed.
The range of the radio connection depends among other s
trongly from the elevation from
the ground of the receiver.
Chec
k battery capacity: Press „+“ and „-“ button at material block simultaneously: Capacity
1=10%... 10=100%
. Capacity < 20%: charging recommended. Store control maximum 3
weeks without charging.