Wireless Connection Guide: TV
(All systems)
1. Connect
B6
Optical Cable to the
B5
Wireless DAC transmitter’s
SPDIF Port.
2. Connect other end of
B6
Optical Cable to the TV Optical
socket.
3. Connect Micro USB Cable to the transmitter and other end to
an available USB socket on the TV.
4. Once connected to your TV, increase volume to 50% of the
maximum for the best sound level.**
* N.B: If your TV does not feature an SPDIF or OPTICAL OUT Socket
then you can instead use the 3.5mm audio connection to connect to
a headphone socket.
** Depending on your TV you may need to enable the Optical output
separately.
To Next Page
Loading...
Need help?
General
