How to test the battery status of the remote control
In standby mode (non-alarming mode), if you briefly click the test button on the remote control, the
LED indicator flashes blue, indicating normal operation and sufficient battery level.
Technical Specifications
Transmission Frequency 868 MHz
Remote Control Range 15 m (in open air)
Operating Temperature 0-50 °C
Battery Type 3 V CR2032 Lithium Battery
Battery Lifetime 1 year
Troubleshooting
Issue Possible Cause Solution
The indicator on the remote
controller does not light up
when the button is pressed.
The insulating film on the battery
has not been peeled off.
Peel off the insulating film.
The battery is not properly in-
stalled (polarization or position).
Take out the battery and re-install it
again. Make sure the contacts are
clean.
The battery power is low. Replace with a new battery.
Wireless interlinked alarms do
not respond to the remote con-
troller.
Unsuccessful pairing. Pair the remote controller and the
wireless interlinked alarms again.
Out of range or interference from
the environment/other devices.
Move to a closer location or another
place and try again.
Note: The range of the remote controller depends on many factors, and the operating distance will
vary depending on the actual operating environment and interference from other electronic devices.
Avoid communication issues or interruptions by checking for things that may affect the radio
communication. Electromagnetic waves can be generated by a variety of devices including TVs,
induction cookers, and microwave ovens.
Warranty
Thank you for purchasing our product. We provide a 5-year guarantee from the date of purchase. If you
have any questions, you are welcome to contact us via info@deltronic.se. We will get back to you
within 24 hours during normal working days.
To Next Page
Loading...
