2020-8-24 Version
3. Quick Start
● Charging the Night Vision Binocular
(1) Open the USB cover.
(2) Plug in the USB cable to charge. It is suggested to use 5V 1A
plug to charge. The charging time is approximately 3 hours using 5V 1A
Note: Do not turn on the power while charging.
● Insert a Micro SD card for photo and video taking (not included)
(1) Insert the card in the direction as below. Push the card into
the slot to lock it.
(2) To remove the card, push it in to release. When the card is
partially ejected, pull it out.
To Next Page
Loading...