8. Setting
22
You can set all the functions and modes of K11 with the remote control enclosed in the package.
CT(Car Type) : Type of the car where this product will be installed.
How to set the CT:
1. Press the CT button(CT) A voice message will say ―Car type.‖
2. Choose your car type by pressing the arrow button
Everytime the button is pushed, recorded voice will tell you a car
type as follows: ―passenger car‖ -> ―SUV‖ -> ―large SUV or VAN‖ ->
―bus or truck‖. Repeatedly press the button until you hear your car type.
When you stop pressing, car type is automatically set.
1
2
1. This button is to activate/deactivate alarm sounds and voice instruction.
When you press button recorded voice explains ―sound has removed‖
or ―sound has been activated‖.
MUTE: Remove the voice instruction.
3
1
2
3
VOL: volume control
How to control volume:
Press VOL button You will hear a voice ―volume control
mode‖.
2. You can control the volume with button.
4
4
2
To Next Page
Loading...
Need help?
General