8. Setting
25
2
1
1. This is to set the timing of an alarm for a right line deviation. If you
feel that the timing of the alarm is too fast or late, you can change the
alarm timing for every 10cm.
2. Press button then you will hear ―right line alarm timing‖.
3. Press button Every time the button is pressed you will hear the
voice message change as follow: ―two levels faster‖ -> ―one level faster‖ -
> ―default level‖ -> ―one level slower‖ -> ―two levels slower‖. When you
hear a message you want, stop pressing and wait for a moment.
RWT(Right Warning Time) : alarm timing for right line deviation
LDWS
1
2
To Next Page
Loading...
Need help?
General