X2Power SLC10004A - User Manual

AUTOMATIC BATTERY CHARGER
3.8A
6V
OR
12V
SLC10004A
AUTOMATIC BATTERY CHARGER
3.8A
EXCLUSIVELY AT BATTERIES PLUS
®
INSTRUCTION MANUAL

Summary

Safety and Precautions

Mounting

Location

Charging Modes Overview

12 V Charging Modes

12 V Normal Mode

For charging 12-volt Flooded, Gel, Maintenance-Free batteries.

12 V Cold;AGM Mode

For charging 12-volt batteries in cold temps below 50°F (10°C) or AGM batteries.

12 V Small Mode

For charging 12-volt Flooded, Gel, Maintenance-Free batteries.

12 V Small - Cold;AGM Mode

For charging 12-volt batteries in cold temps below 50°F (10°C) or AGM batteries.

6 V and Lithium Charging Modes

6 V Normal Mode

For charging 6-volt Flooded, Gel, Maintenance-Free batteries.

6 V Cold;AGM Mode

For charging 6-volt batteries in cold temps below 50°F (10°C) or AGM batteries.

12.8 V Lithium Mode

For charging 12.8-volt lithium iron phosphate batteries. Requires battery voltage >= 11.6V.

12 V Recover Mode

For recovering/repairing old, idle, damaged, stratified or sulfated Lead Acid batteries.

Charging Times

Preparing to Charge

Connecting to Battery

Starting the Charging Process

State of Charge Indicators

Troubleshooting

Limited 5 Year Warranty

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

The SLC10004A is an automatic battery charger designed for various battery types and sizes, offering a range of charging modes to ensure optimal battery health and performance. Its primary function is to charge and maintain 6V and 12V lead-acid batteries (flooded, gel, maintenance-free, AGM) and 12.8V lithium iron phosphate (LiFePO4) batteries.

Function Description

The charger operates by converting standard household AC power (110-120V AC 60 Hz) into DC power suitable for battery charging. It features multiple charging modes tailored to different battery chemistries, voltages, and environmental conditions. The device is equipped with a microprocessor that monitors the charging process, adjusting the current and voltage as needed to prevent overcharging and ensure efficient charging.

The SLC10004A includes a "Stand By" mode, which is the initial state upon connecting to power, and various active charging modes. These modes are selected via a "MODE" button on the device's interface. Some advanced modes, such as "Lithium" and "Recover," require the mode button to be pressed and held for three seconds to prevent accidental selection, emphasizing the need for user attention.

The charger is designed to be user-friendly, with LED indicators providing clear feedback on the charging status and any potential errors. These indicators help users understand the battery's state of charge and troubleshoot issues.

Usage Features

The SLC10004A offers a comprehensive set of usage features, making it versatile for different charging needs:

• Multi-Voltage and Chemistry Support: It can charge 6V and 12V lead-acid batteries (flooded, gel, maintenance-free, AGM) ranging from 1.2Ah to 120Ah. It also supports 12.8V lithium iron phosphate (LiFePO4) batteries from 8Ah to 50Ah. This broad compatibility makes it suitable for a wide range of vehicles and applications, from small motorcycles to larger automotive batteries.

• Multiple Charging Modes:

  • 12V Normal Mode (3.8A): For standard charging of 12-volt flooded, gel, and maintenance-free batteries (12Ah-120Ah).
  • 12V Cold/AGM Mode (3.8A): Optimized for 12-volt batteries in cold temperatures (below 50°F / 10°C) or AGM batteries (12Ah-120Ah). This mode adjusts charging parameters to compensate for temperature effects, ensuring efficient charging in colder environments.
  • 12V Small Mode (0.9A): A lower current mode for smaller 12-volt flooded, gel, and maintenance-free batteries (1.2Ah-12Ah). This gentle charge is ideal for maintaining smaller batteries without overstressing them.
  • 12V Small - Cold/AGM Mode (0.9A): Combines the features of the "Small" and "Cold/AGM" modes for small 12-volt batteries in cold conditions or small AGM batteries (1.2Ah-12Ah).
  • 6V Normal Mode (3.8A): For standard charging of 6-volt flooded, gel, and maintenance-free batteries (12Ah-120Ah).
  • 6V Cold/AGM Mode (3.8A): For 6-volt batteries in cold temperatures or 6V AGM batteries (12Ah-120Ah).
  • 12.8V Lithium Mode (3.0A): Specifically designed for 12.8-volt lithium iron phosphate batteries (8Ah-50Ah). This mode requires a battery voltage of 11.6V or greater to activate, ensuring safe charging for LiFePO4 batteries. This is an "enhanced" mode, requiring a press-and-hold action to select.
  • 12V Recover Mode (2.0A): An "enhanced" mode for recovering and repairing old, idle, damaged, stratified, or sulfated 12V flooded and maintenance-free lead-acid batteries (1.2Ah-120Ah). This mode is crucial for extending the life of neglected lead-acid batteries. It is explicitly stated that this mode should NEVER be used on lithium batteries.

• State of Charge (SOC) Indicators: The device features four LED indicators (25% Red, 50% Orange, 75% Yellow, 100% Green) that provide a visual representation of the battery's charge level. These LEDs flash when the battery is below the indicated percentage and become solid once that charge level is reached, offering clear progress updates.

• Error Indicators: The charger includes a robust troubleshooting system with LED indicators for various error conditions:

  • Solid Red LED: Indicates the battery is not accepting a charge. The user is advised to try "Recovery Mode" for lead-acid batteries.
  • Flashing Yellow LED: Suggests the battery capacity may be too high for the selected mode. Users should verify the battery capacity and charge mode.
  • Solid Yellow LED: Indicates the battery voltage is either too high or too low for the selected mode, prompting users to verify battery voltage and charge mode.
  • Flashing Red LED: Signals reverse polarity, requiring the user to reverse the battery connections immediately.

• Safety Features: The charger incorporates several safety measures, including protection against reverse polarity, short circuits, and overcharging. It is designed to operate in well-ventilated areas, and users are advised to wear eye protection and avoid contact with battery acid.

Maintenance Features

The SLC10004A is designed for minimal maintenance, focusing on safe operation and longevity:

• Durable Construction: The device is built to withstand normal use, but users are cautioned against exposing it to rain, snow, or moisture.
• Cleaning: The charger's surface can be cleaned with a lint-free cloth. It should never be immersed in water.
• Self-Monitoring: The charger's internal electronics periodically check the charging process, reducing the need for constant manual oversight.
• User Responsibility: Users are encouraged to periodically check the battery charger while charging and to ensure proper ventilation around the battery. Before any maintenance or cleaning, the charger must be unplugged from the power source.
• Repair and Service: In case of damage to the cord, plug, or the charger itself due to shock, users are advised not to operate it and to take it to a qualified technician for repair, emphasizing that the device should not be disassembled by the user. Incorrect reassembly can lead to electrical shock or fire.

The SLC10004A is a reliable and intelligent battery charger that prioritizes safety and efficiency, offering tailored charging solutions for a variety of battery types and conditions. Its intuitive LED indicators and multiple modes make it a valuable tool for battery maintenance.

X2Power SLC10004A Specifications

General

Number of Ports	1
Output Voltage	12V
Output Current	10A
Battery Type	AGM, Gel
Input Frequency	60 Hz