Xantech XT-HDBT-MX44-4K-KIT - User Manual

XT-HDBT-MX44-4K-KIT USER MANUAL
10019309 REV-A0
®
© 2018 XANTECH
®
is a registered trademark of Nortek Security & Control.
User Manual
XT-HDBT-MX44-4K-KIT
Our XT-HDBT-MX44-4K-KIT 4x4 HDBaseT™ Matrix offers unprecedented performance and value for the custom installation market. The XT-
HDBT-MX44-4K-KIT is a 4K HDCP 2.2 Matrix package, delivering HDMI, Bi-directional IR and PoH (PoE) up to lengths of 70m over a single CAT
cable. The Matrix also provides advanced features including simultaneous HDBaseT™/HDMI on output 1 and a web browser interface module for
control and configuration of the matrix. The XT-HDBT-MX44-4K-KIT is supplied with 4 x XT-HDBT-EX70-4K-RX Receivers.
Introduction
Key Features
• Advanced HDBaseT™ technology offering uncompressed video and audio with zero latency
• Features 4x HDMI inputs which can be independently routed to 4x HDBaseT™ outputs
• Output 1 features simultaneous HDMI and HDBaseT™ output
• Extends HDMI up to a distance of 70m over single CAT cable
• Supports 4K UHD video up to 40m (3840 x 2160 @30Hz 4:4:4, 4096 x 2160 @24Hz 4:4:4, and 4K @60Hz 4:2:0)
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio Transmission
• Web interface module for control and configuration of Matrix
• Supports bi-directional IR on all HDBaseT outputs
• Control via front panel , IR, RS-232 and TCP/IP
• 1U Design for 19” rack mount integration - Mounting kit included
• Advanced EDID management
• HDCP 2.2

Summary

Introduction

Key Features

Highlights advanced HDBaseT™ technology, 4K UHD support, and comprehensive control options.

Adjusting The EDID Settings

EDID Dip-switches

Explains how to configure EDID settings using DIP switches on the rear of the matrix.

Remote Control Description

Terminating HDBaseT CAT cable

Control Ports

Connections Overview

TCP;IP Control

Explains control via TCP/IP, including the web browser interface and required cable.

RS-232 2-Way Control

Details RS-232 control, including pin assignments, communication settings, and cable types.

RS-232 and Telnet Commands

Commonly Used Serial Commands

Lists common commands for status, power, and output control (e.g., STATUS, PON, OUTxxFRyy).

RS-232 Command Reference

Example Schematic

Specifications

XT-HDBT-SP14-4 K Specifications

XT-HDBT-EX70-4 K-RX Specifications

Package Contents

Xantech XT-HDBT-MX44-4K-KIT Specifications