Need help?Do you have a question about the Xantrex PRO XM 1000 and is the answer not in the manual?
Warns about explosion hazards associated with lead-acid batteries and inverter sparks.
Provides safety guidelines for handling batteries, including explosion and fire risks.
Cautions about potential damage to rechargeable equipment from the inverter's output.
Details the inverter's built-in safety and protection features against various faults.
Guides users on planning their inverter installation for optimal performance.
Emphasizes adherence to local and national electrical codes for installation.
Explains how to determine the necessary battery capacity for the system.
Advises on selecting an appropriate charging system for battery maintenance.
Provides criteria for selecting a safe and suitable mounting location for the inverter.
Details the process of calculating appropriate cable sizes for safe operation.
Focuses on determining the correct size for DC input cables.
Guides on selecting the correct size for the chassis ground cable.
Explains how to select the correct fuse or circuit breaker size.
Provides step-by-step procedures for physically installing the inverter.
Explains how to use the inverter's front panel controls and displays.
Describes how the inverter functions when connected to an AC source.
Details how the inverter operates using battery power.
Instructions on how to power the inverter on and off using the remote panel.
Explains the meaning of various fault codes displayed by the inverter.
Provides a table of common problems, causes, and solutions.
Provides a method and example for calculating needed battery capacity.
To Next Page
General