Need help?Do you have a question about the Xantrex Freedom X 1000 120VAC 12VDC and is the answer not in the manual?
General| Model | Freedom X 1000 |
|---|---|
| Input Voltage | 12 VDC |
| Output Voltage | 120 VAC |
| Continuous Output Power | 1000 W |
| Surge Power | 2000 W |
| Output Waveform | Modified Sine Wave |
| Efficiency | 90% |
Lists all items included in the Freedom X base package for installation.
Highlights the main performance and protection features of the Freedom X inverter.
Lists the factory default configurations for various inverter programs and parameters.
Identifies and describes the terminals and features on the AC/DC, GFCI, Display, and Side panels.
Covers preliminary steps, safety warnings, and applicable installation codes and standards.
Specifies necessary tools, materials, and outlines basic installation steps.
Details specific guidance for marine applications and drip shield installation.
Describes the display panel, LEDs, buttons, icons, and how to view information.
Explains how to adjust feature settings and lists configurable parameters with their ranges.
Details operating in battery mode, turning on/off, and power save features.
Guides on checking battery status, output power, and managing audible alarms.
Covers transitions between power modes and the inverter's operational limits and conditions.
Provides periodic maintenance recommendations for cleaning and securing the Freedom X inverter unit.
A guide to performing checks before contacting customer support for troubleshooting issues.
Lists and explains various warning messages, alarms, and error codes displayed by the inverter.
A table detailing common problems, possible causes, and solutions for diagnosing issues.
Details dimensions, weight, operating temperatures, and humidity limits for the inverter.
Lists technical system specs, transfer times, voltages, cooling, and regulatory compliance standards.
To Next Page