Before You Begin the Installation
14 Freedom X Owner's Guide
Before You Begin the
Installation
Before beginning your installation:
n Read this entire Installation section so you can plan the
installation from beginning to end.
n Assemble all the tools and materials you require for the
installation.
n Review the Important Safety Instructions on page v
n Be aware of all safety and electrical codes which must be
met.
WARNING
ELECTRICAL SHOCK AND FIRE HAZARD
l
All wiring should be done by qualified personnel to ensure
compliance with all applicable installation codes and
regulations.
l
Do not connect to AC and DC power sources during
installation. Disconnect from all power sources when
servicing.
l
Disable and secure all AC and DC disconnect devices and
automatic generator starting devices.
l
To prevent risk of fire, do not cover or obstruct ventilation
openings. Do not mount in a zero-clearance compartment.
Overheating may result.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
To Next Page
Loading...
Need help?
General