Need help?Do you have a question about the Xantrex Freedom X 1200 120VAC and is the answer not in the manual?
Manual title and specific product part number for reference.
Section to record system details for warranty and support.
Explains the guide's purpose, scope, intended audience, and defines terms.
Explains the meaning of different safety alert symbols and keywords like DANGER, WARNING, CAUTION, NOTICE.
Essential safety advice and warnings before starting installation procedures.
Details specific risks like electric shock, fire, explosion, and physical injury.
Safety measures and hazards associated with working directly with batteries, including burn risks.
Guidelines for safely placing the inverter and relevant regulatory compliance.
Information for users regarding FCC rules and potential interference.
Lists the items included in the Freedom X base package.
Detailed overview of the inverter's main operational features and capabilities.
Identifies and describes the components on the inverter's AC panel.
Details the DC connections panel and the inverter's display panel functions.
Describes the side panel features and the AC/DC compartment covers.
Outlines applicable electrical codes and installer responsibilities for safe installation.
Lists the necessary tools and materials for installing the Freedom X inverter.
Provides a step-by-step guide to the installation process.
Details AC source connection, protection devices, distribution, and wiring.
Covers DC cable sizing, grounding, and GFCI protection for AC output.
Guidelines for selecting an optimal and safe installation location for the inverter.
Instructions on how to physically mount the inverter, including approved orientations.
Specifies grounding points and recommended cable sizes for RV and marine installations.
Covers general AC wiring practices, separation of AC/DC wires, and GFCI connections.
Illustrates typical components for a marine installation of the Freedom X.
Instructions for installing drip shields to protect the unit from moisture.
Explains how to interpret the inverter status displayed on the LCD screen.
Details how to view battery voltage, discharge current, and load percentage.
Guides users on understanding LCD icons for battery/load levels and LED status indicators.
Explains how to enter the feature settings mode using the inverter's buttons.
Instructions for adjusting the power save timer and load sensing features.
Guides on setting the low battery cutout voltage and shutdown delay timer.
Explains how to enable or disable inverter operation based on vehicle ignition signals.
Instructions for adjusting the AC transfer speed and output frequency settings.
Guides on how to turn the audible alarm on or off for system warnings.
Procedures for resetting settings to factory defaults and checking the firmware version.
Explains how the inverter operates in AC Mode (shore power) and Battery Mode (inverter).
Instructions for operating the inverter and configuring the power save timer.
How to check power output and best practices for operating multiple loads.
Details the acceptable input voltage ranges for proper inverter operation.
Describes overload conditions, high surge loads, and over-temperature protection.
Guides users on how to diagnose problems and interpret error codes.
Lists and explains error codes displayed on the LCD screen for system alerts.
A table correlating common problems with their possible causes and solutions.
Explains how the inverter performs with different types of AC loads like resistive and motor loads.
Details the physical dimensions, weight, operating temperature, and humidity.
Provides technical data on DC input, AC output parameters, and regulatory compliance.
To Next Page
General