Do you have a question about the Xantrex XPower 700 PLUS and is the answer not in the manual?
Input Voltage | 12 VDC |
---|---|
Output Waveform | Modified Sine Wave |
Cooling | Fan Cooled |
AC Outlets | 2 |
Low Battery Alarm | Yes |
Overload Protection | Yes |
Thermal Protection | Yes |
Power Output | 700 Watts |
Surge Power | 1400 Watts |
Output Voltage | 120 Volts AC |
USB Port | 5V/2.1A USB port |
Learn about the XPower Plus inverter family, its design, and capabilities for powering AC products from vehicle or battery sources.
Overview of the manual's content, including safety, connection, operation, troubleshooting, and warranty information for user reference.
Details potential hazards like shock, heated surfaces, and explosion risks associated with inverter use, differentiating between warnings and cautions.
Further safety precautions regarding AC power connection, temperature limits, water exposure, foreign objects, and utility wiring.
Description and illustration of the front panel components, including AC outlets, power indicator, and fault indicator.
Explanation of the back panel features, including ventilation openings, cooling fan (for 400/700 Plus), and DC input terminals.
Guidance on selecting a suitable installation site for the inverter, considering environmental factors like dryness, temperature, and ventilation.
Step-by-step instructions for connecting the XPower 175 Plus and 400 Plus via lighter plug for loads under 150 watts.
Instructions for direct battery connection of XPower 400 Plus and 700 Plus for loads exceeding 150 watts, using battery clips.
Details on normal operation, low battery alarm/shutdown, overload, over-temperature, and high input voltage shutdown conditions.
Procedure for safely powering down the inverter, including disconnecting the battery and using the front panel switch.
Information on powering AC products and their maximum power rating limits for continuous operation, referencing power and surge ratings.
Table showing expected operating times for different XPower models with specific loads and sample appliances.
Recommendations for preserving battery life, including avoiding deep discharge, managing charging, and inverter power draw when off.
Identifies common issues like audio buzz and television interference, offering solutions and mitigation strategies.
Guide to diagnosing problems, their symptoms, causes, and suggested remedies for various inverter operational issues.
Details on what the limited warranty covers, its duration (one year), and Xantrex's responsibilities for defects.
Describes Xantrex's commitment to repair or replace defective products using new or reconditioned parts at its discretion.
Instructions on how to contact Xantrex for troubleshooting, warranty service, and return material authorization (RMA) procedures.
Information on what is not covered by the limited warranty, including normal wear, installation costs, misuse, and unauthorized repairs.