Xantrex Trace C60 User Manual

©2000 Xantrex Technology Inc.
LED Status Indicator
A multi-color LED indicates the operating status of the controller. A color-
coded label is included on the cover of the controller explaining the status LEDs
operation. When the controller is in Charge Control mode, the LED will be
green. When in Load Control mode, the LED will be red. An orange LED
indicates an error or a load disconnect condition. When battery equalization is
in process, the LED alternates between red and green.
NOTE: The green and red color of the LED only indicates the particular
operating mode and the battery voltage level. It does not indicate whether the
charging source is functioning properly.
2.0 FEATURES
7
Green Blink Charge Control Mode
Green Solid Battery Charged
Green
Red Blink Load Control Mode
Red Solid
Battery Discharged
Red
C35
C40
C60
12/24 VDC
12/24/48 VDC
12/24 VDC
35 Amp Controller
40 Amp Controller
60 Amp Controller
/
Alternating - Equalization Enabled
5916-195th STREET NE ARLINGTON WASHINGTON 98223 TELEPHONE(360)435-8826 FAX(360)435-2229
STATUS
Charge / Load Controller
Orange Blink Slow Load Disconnected
Overload/Overtemp
Orange Blink Fast
Multicolor LED Indicator
Table 2
Battery Voltage LED Indications
Figure 1
CSeries Front Panel Label
)rotacidnIsutatSDELgnisU(EGATLOVYRETTAB
)edoMnoisreviD/egrahC(DELneerG
DEL
SUTATS
)edoMlortnoCdaoL(DELdeR
gnitteSTAOLFtayrettaB
NOsyawlA
)DVL=setunim6rof(gnitteSDVLtayrettaB
gnitteSKLUBtayrettaB
sknilB5
51.0>
DVLevoba
03.0>
DVLevoba
54.0>
DVLevoba
)-(suniMgnitteSkluB )+(sulPgnitteSDVL
CDV52.0CDV05.0CDV00.1
sknilB4
CDV51.0CDV03.0CDV54.0
CDV05.0CDV00.1CDV00.2
sknilB3
CDV03.0CDV06.0CDV09.0
CDV57.0CDV05.1CDV00.3
sknilB2
CDV54.0CDV09.0CDV53.1
57.0>
kluBwoleb
05.1>
kluBwoleb
00.3>
kluBwoleb
knilB1
54.0>
DVLevoba
09.0>
DVLevoba
53.1>
DVLevoba
stlov21stlov42stlov84egatloVCDstlov21stlov42stlov84

Xantrex Trace C60 Specifications

General

Brand	Xantrex
Model	Trace C60
Category	Controller
Language	English