Need help?Do you have a question about the Xantrex XW4548-230-50 and is the answer not in the manual?
Details on the XW Hybrid Inverter/Charger's capabilities and design.
Explains how the inverter/charger functions in various modes and multi-unit setups.
Safety feature preventing harm during grid disturbances or maintenance.
How to use the Inverter Information Panel to monitor AC input, inverter, and charger status.
Using the SCP to monitor system status, home screens, and other screens.
Interpreting the System Status screen for overall system performance and data.
Understanding the real-time operating data displayed on the Inverter Home screen.
Viewing total system power, grid, and load status on the Meters screen.
How to access and use the System Control Panel for configuration.
Navigating basic and advanced setup menus for system configuration.
Configuring inverter operation parameters like low/high voltage cutouts.
Adjusting settings for battery charging based on battery type.
Customizing charging and equalization voltages for specific battery types.
Configuring voltage and frequency limits for AC input sources.
Configuring grid-tie operation modes like Sell and Load Shave.
Enabling generator support to assist with heavy loads.
Configuring the auxiliary output for powering external devices or alarms.
Configuring units for multi-unit or three-phase system operation.
Setting up the inverter for three-phase system operation.
Defining connections for multi-unit systems and device interaction.
Restoring factory default settings for the inverter/charger.
Detailed electrical performance data for different models.
Graphs showing temporary overload operation time versus output current.
How ambient temperature affects output power derating.
Physical dimensions, weight, and enclosure details.
Overview of configurable menus and their default values.
Default settings and ranges for inverter operation parameters.
Default settings and ranges for battery charger configuration.
Default settings and ranges for custom battery type configuration.
Default settings and ranges for AC input and breaker configurations.
Default settings and ranges for grid support features.
Default settings and ranges for auxiliary output configuration.
Details of the product's limited warranty, coverage, and transferability.
Procedures for returning products for service or warranty claims.
To Next Page
General