XCEL Q-SERIES User Manual

14
 CHARGE STATUS AND OUTPUT DISPLAY MENU
o Display shows (assume 24V Battery Charger):
 STAT: Status Identifier. Refer to Status Identifier Table
 -Vdc-: Battery Voltage measured on the output leads
 -Adc-: Charge Current Output measured in amps
 This menu displays as the default menu during charging. The Status
displays the current charge stage in effect – for example, cCCT is Bulk
Constant Current Charge Stage.
 CHARGE STATUS AND INPUT DISPLAY MENU
o Display shows (assume 24V Battery Charger):
 STAT: Status Identifier. Refer to Status Identifier Table
 -Vdc-: Battery Voltage measured on the output leads
 -Adc-: Charge Current Output measured in amps
 This menu does not display as a default. It must be selected.
 Additionally, only the Vac is displayed and is for reference use by Tech
Support, only – the value is not indicative of actual utility AC power
 ERROR CODE DISPLAY MENU
o Display shows (assume 24V Battery Charger):
 ERROR Code: Refer to LCD Error Code Table
 Second Line: Brief Description of Error – Refer to Troubleshooting
 This menu displays as the default menu after an Error Condition has
been reported.
 Additionally, the backlight flashes in an on-on-on-off pattern, repeatedly
 CHARGE STATUS AND TEMPERATURE DISPLAY MENU
o Display shows (assume 24V Battery Charger):
 STAT: Status Identifier. Refer to Status Identifier Table
 Int*C: Internal Charger Temperature in Celsius
 Ext*C: External Battery Temperature in Celsius
 This menu does not display as a default. It must be selected.
STAT ---Vdc--- ---Adc---
cCCT 27.4 20.1
STAT ---Vac--- ---Aac---
cCCT 127.4 N/A
ERROR_Code -> 01
Battery OverVolt
STAT Int*C Ext*C
cCCT 37 25

XCEL Q-SERIES Specifications

General

Brand	XCEL
Model	Q-SERIES
Category	Battery Charger
Language	English