This document describes the XCQQ Smart Toilet Seat, available in two models: S8L (Panel Control) and V90L (Remote Control). It provides essential information for safe use, installation, operation, and maintenance.
Function Description
The XCQQ Smart Toilet Seat offers a range of features designed for personal hygiene and comfort. Key functions include:
-
Washing:
- Hip Wash: When seated, pressing this button activates a rear spray. Pressing it again initiates an oscillating massage wash.
- Wash Woman: Designed for feminine hygiene, this function provides a front spray for 2 minutes. Pressing it again during the cycle activates an oscillating cleaning. Water pressure can be adjusted using the "Water Adjust" control.
- Turbo Wash (S8L): Activated when seated and pressing the "Light/Help" button, this provides intensive water pulsation for defecation assistance.
- Nozzle Position Adjustment: The nozzle position can be adjusted in 4 levels (2nd gear forward, 2nd gear backward) during cleaning.
- Water Pressure Adjustment: During cleaning, water pressure can be adjusted in five levels using the '+ -' controls.
-
Drying:
- Dry: This function provides warm air drying for 5 minutes or stops automatically after the user leaves the seat. The warm air temperature can be adjusted in 5 levels (from room temperature to 102°F) using the "Dry Temp" control.
-
Comfort & Convenience:
- Heated Seat: The seat temperature can be adjusted to four levels (Room temperature, Low-91°F, Medium-99°F, High-102°F).
- Water Temperature Adjustment: The water temperature can be adjusted to four levels (Room temperature, Low-91°F, Medium-96°F, High-102°F).
- Auto Mode: This mode initiates a sequence of hip washing (30s), oscillating cleaning (30s), and drying (3 minutes). If the Bidet or Wash Women button is pressed before auto, it performs feminine wash.
- Kids Mode: This function is designed for children, offering a sequence of hip washing (15s), oscillating cleaning (15s), and drying (2 minutes). The water pressure is lower than for adults. This function works even if the child's body is not in the seat sensor area.
- Stop: This button halts all currently operating functions.
- Lighting (S8L): When standing, pressing the "Light/Help" button toggles the light on/off.
- ECO Mode / Long Press Power Button: Pressing this button activates an 8-hour ECO mode to reduce energy consumption. It automatically turns off after 8 hours or when the user sits on the toilet. Press and hold to turn off the power of the remote control.
Important Technical Specifications
The smart toilet seat is classified as Class I Equipment and requires grounding.
- Electric Load: AC 120V / 1300W / 60HZ
- Cleaning System:
- Water Temp: 4 Levels
- Heater Capacity: AC 120V / 1200W / 60HZ
- Bidet Tank Capacity: 0.2 L
- Overheating Safety: Temperature safety reset protector integrated. The toilet will shut down if temperature is out of specs.
- Anti-Reflux: Anti-Reflux check valve.
- Drying System:
- Drying Air Temp: 4 Levels
- Air Speed: 1 Level
- Heater Capacity: AC 120V / 190W / 60HZ
- Overheating Safety: Temperature Fuse
- Heating Seat:
- Seat Temp: 4 Levels
- Heater Capacity: AC 120V / 45W / 60HZ
- Overheating Safety: By design
- Limitations:
- Water Supply Pressure: Lowest water pressure is 100 kPa (14.5 psi), highest water pressure is 500 kPa (72.5 psi).
- Water Supply Temp: 15-35 °C
- Ambient Temp: 15-35 °C
- Water Pressure Range (Inlet): 0.05-0.75Mpa.
- Power Supply: AC 120V/1300W/60Hz (specified).
Usage Features
- Installation:
- Requires connection to a cold water supply only to prevent burns and equipment damage.
- The power breaker must be accessible.
- New hose components and accompanying parts must be used; old components can cause leakage.
- The product is installed by aligning it with the fixing plate and pushing until a "click" sound is heard.
- Disassembly involves unplugging the power cord and DMT tube, pressing the buckle, and pulling the bidet from the fixing plate.
- First Use:
- After installation, ensure the water supply valve is open before powering on.
- If the blue light flashes, unplug the device for 30 seconds, turn on the water source, then reconnect power.
- The nozzle performs a self-inspection process upon first power-on.
- A delay of 10-15 seconds for the first spray is normal.
- Remote Control Pairing (V90L):
- To pair, press and hold the rotary knob for 5 seconds until a "Beep" sound is heard and the screen flashes. Then, press any button on the remote control. A second "Beep" and the screen stopping flashing indicate successful pairing.
- Safety Precautions:
- Do not touch the power cord with wet hands.
- Do not pour water or detergent on the product body or power plug.
- Do not disassemble, repair, or alter the product.
- Do not install on mobile vehicles.
- Do not use if the main unit is unstable, cracked, broken, leaking, or emitting strange noises/odors.
- Only use drinking water; avoid seawater or recycled water.
- Do not touch the power cord during thunderstorms.
- Do not allow the water supply hose to touch the power cord connection.
- Do not damage the power cord (strike, yank, twist, bend, etc.).
- Do not use any power supply other than specified.
- Avoid sitting on the seat for long periods to prevent low-temperature burns, especially for children, the elderly, or those with limited mobility.
- Do not cut the string connecting the main unit and base plate.
- Install in a bathroom with a fan or ventilation port to ensure good airflow and prevent water from getting on the product.
- Close supervision is necessary when used by or near children or invalids.
- Use only for its intended purpose as described in the manual.
- Do not block air openings or place on soft surfaces.
- Do not use outdoors where aerosol products are used.
- Do not stick fingers or objects into the warm air outlet.
- Do not throw lit cigarettes or other combustibles into the toilet seat.
- Do not apply strong force, step on, or stand on the toilet seat/lid/main unit.
- Do not lift the product by the toilet seat or lid.
- Do not remove the water filter drain valve when the shutoff valve is open.
- Do not fold, crush, or cut the water supply hose.
- Do not install the base plate if it is not attached.
- Close the shutoff valve if a water leak occurs.
- Prevent freezing in cold temperatures by regulating room temperature, draining water, or closing the shutoff valve and draining the unit.
Maintenance Features
- Main Body Cleaning:
- Clean with foam rubber or a soft dry cloth and mild detergent.
- Do not use thinner, strong detergents, chemicals, pesticides, or reodorants, as these can damage plastic parts and the water supply hose.
- Nozzle Cleaning:
- Press the "bidet or posterior wash button" when not seated to extend the nozzle.
- Clean the nozzle with a toothbrush or soft cloth.
- Do not over-pull the nozzle.
- Press the stop button after cleaning to retract the nozzle automatically.
- Do not reset the nozzle in the removing condition.
- Filter Replacement:
- Turn off the water supply.
- Unplug the connecting pipe on both sides of the filter.
- Replace with a new filter.
- Plug the connecting pipe into the filter.
- It is suggested to replace the water filter every 4-6 months, depending on water quality.
- Long-Term Storage / Draining:
- Stop the power supply and water supply.
- Lift up and pull out the product.
- Screw out the drainage screw and drain the water.
- Screw the drainage screw back.
- When using the product again, allow it to refill with water first to prevent contamination and skin inflammation.
- Antifreeze Measures:
- To prevent freezing of DMT pipes/three-way valves in low winter temperatures:
- Raise indoor temperature.
- Close the water supply valve.
- Drain the water from the DMT pipe.
- Troubleshooting:
- If the power is suddenly off during use, the product will run a self-checking system and recover after power on.
- If the power cord is damaged, it must be replaced by the manufacturer's repair department or an equivalent specialist.
To Next Page
Need help?
General