9 Central Weight Pocket 1/3
The STEALTH 2.0 weight system in the basic configuration consists of the central weight pocket placed on the
back, and in the optional trim pockets which allow for an increase in the total weight capacity of the system as
well as improved trim adjustment.
Depending on personal needs, the user may configure the harness by mounting or removing the various pocket
versions. It allows you to adjust the capacity of the weighting system both for diving done in the tropics in a
lightweight wetsuit, and also for diving in cold water with the use of a dry-suit and thick undergarments.
The harness is delivered in the standard configuration, in which the central weight pocket is located in the
highest place. The central weight pocket may be mounted at various heights, which allows you to precisely
establish your exact center of gravity, and at the same time the ideal trim.
The element which serves to adjust the central weight pocket is a metal adaptor, which is provided with the
harness. It is mounted on a strap which connects the lower and upper nodes and allows the screwing in of the
central weight pocket. The picture below shows how to attach the adaptor on the strap:
Fig. 9. Central weight pocket in the extreme positions and placement of the center of the gravity
Fig.10. The adapter and it’s bolt attachment to the strap
To Next Page
Loading...
Need help?
General
