Xerox 100 - Page 53

Xerox Nuvera
®
100/120/144 EA Digital Production System - Customer Expectations Document
- 53 -
• An operator can not request an unload dynamically while the DS5000 is in operation. To unload, the
operator must wait until the stacker becomes full, or pause the machine.
• The DS5000 does not honor “jog” or “offset” requests embedded in the print data stream (i.e. the
DS5000 does not support subset offsetting).
• The DS5000 can offset any size sets at full rated speed, without incurring additional skips.
• The DS5000 does not support the use of ‘jam offset sheets’.