Xerox 2400 Series User Manual

Xerox Scanner User’s Guide 105
Scanning from the TWAIN Interface
4. Click Yes then click Next.
The next window offers you the option to run hardware
diagnostics.
5. Click Yes (recommended) then click Next.
The next window is for checking the connection between your
scanner and the computer.
6. Click Next.
After the Setup Wizard checks the connections, the next
window is displayed. It has a series of setup options, but only
the Basic scan test is necessary because your scanner was
already tested and calibrated when you installed the One
Touch 4.0 software.

Xerox 2400 Series Specifications

General

Brand	Xerox
Model	2400 Series
Category	Scanner
Language	English