Xerox Scanner User’s Guide 73
Scanning
8. Press the scanner button you’ve set up for HTML scanning.
When scanning is finished, the document is first converted to
editable text using the OCR process, then is converted into an
HTML format. Microsoft Internet Explorer then opens showing
your converted page.
9. Choose Save As from the Internet Explorer File menu, give the
page a name, and save it in the location you use for your web
page files.
You may also want to write down the address shown in the
Address bar to make sure you’ll know where to find your new
HTML page later on.
10. You can now use Microsoft Internet Explorer or other
application to post the document to your web page as you
would any other HTML page.
NOTE: Depending on the complexity of the document, its
conversion to the HTML format may take a few moments.
To Next Page
Loading...
Need help?
General