Xerox 2400 Series User Manual

Xerox Scanner User’s Guide 77
Scanning
11. Click OK. The new configuration is now listed as a Transfer to
Storage configuration.
12. Repeat the process to create additional new configurations,
such as one named “Storage for Personal Receipts.”
13. Make sure to designate separate folders as the Storage
Locations for the new configurations.
You will now have multiple configurations set up for the
Transfer to Storage destination, and each configuration scans
documents to separate folders.
Scan to multiple storage folders:
1. Open the One Touch Properties window.
2. Click the Archive tab (or other tab if you set up another button
for archiving).
3. Make sure Transfer to Storage is selected as the Destination
Application.
4. Select one of the configurations you created for storage.
5. Click OK. The One Touch Properties window closes.
The One Touch panel will show the name of the configuration.
The new configurations
apply to the Transfer to
Storage Destination
Application.

Xerox 2400 Series Specifications

General

Brand	Xerox
Model	2400 Series
Category	Scanner
Language	English