Security-Related Supplement to User Guidance
Security-Related Supplement to User Guidance 5
Resetting the Printer to Factory Default Settings
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Device Settings > Reset UI to Factory Settings.
3. Touch Restart.
CAUTION: All current settings are lost. All settings are reset to factory defaults.
Disabling IPsec at the Control Panel
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Security Settings > IPsec.
3. Touch Disable IPsec.
Note: IPsec can be enabled only in CentreWare Internet Services.
Setting Job Deletion Options at the Control Panel
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Security Settings > Authorization.
3. Touch Job Deletion.
4. To restrict users from deleting jobs, touch System Administrator Only. To allow all users to delete
jobs, touch All Users.
5. Touch Save.
Setting the Fax Country at the Control Panel
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Service Settings > Fax Country Setting.
3. Select your country from the list.
4. Touch Save.
Setting the Paper Size Preference at the Control Panel
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Device Settings > Paper Management > Paper Size Preference.
3. To display paper sizes in inches or metric, touch Inches or Metric.
4. Touch Save.
To Next Page
Loading...
Need help?
General
