Xerox ColorQube 9303 Series User Manual

Service Settings
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
211
• Enabled instructs the printer to sound the tone when a fax is received. Select High, Medium, or
Low.
• Disabled deactivates the tone.
Secure Receive
If this option is enabled, a four-digit passcode is requested. The passcode is required in order to print
any incoming fax.
• Enable activates Secure Receive. type a four-digit passcode to be used to release incoming fax
jobs for printing.
• Disable enables all incoming faxes to print without the passcode.
Default Output Options
If the printer is fitted with a finisher, you are able to staple, two-hole punch, or double-side your
incoming faxes. This utility is used to specify the output options you require for all the incoming faxes.
• Staple staples all incoming fax output, if enabled.
• Hole Punch prints all incoming faxes on two-hole punched media, if enabled.
• 2-Sided prints all incoming faxes 2-sided, if enabled.
Transmission Defaults
Use these options to set the fax sending defaults.
Automatic Redial Setup
If the printer cannot make contact with the destination fax machine, it automatically waits and redials
later. Use this setting to specify the interval between unsuccessful attempts and the number of times
the printer redials.
• Redial Time Interval is used to specify the time interval between redials for a failed transmission.
Type a value, 1–25 minutes.
• Automatic Redial Attempts instructs the printer how many times to redial the remote fax
machine, before rejecting the job. Type a value, 0–14.
Automatic Resend
If the printer connects to the receiving fax machine, but the fax transmission is unsuccessful, the
printer automatically attempts to resend the fax. Use this setting to specify how many attempts
should be made to resend the fax and which pages should be resent.
• Set number of resends is used to specify how many times the fax is resent. Select a number, 0–5.
• Failed page(s) without a cover page is selected to resend the failed pages but not the cover page
again.
• Whole Job without a cover page is selected if the entire job except the cover page should be
resent.
• Failed page(s) with a cover page is selected if only the failed pages should be resent with the
cover page.
• Whole job with cover page is selected if the whole job including the cover page should be resent.

Xerox ColorQube 9303 Series Specifications

General

Brand	Xerox
Model	ColorQube 9303 Series
Category	All in One Printer
Language	English