Output Format
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
27
• Pages per Slide: Individual images reduced to fit onto one sheet of
paper.
• Repeat Image: Multiple copies of the same image reduced to fit onto
one sheet of paper.
The actual number of rows and columns available
is limited by the minimum reduction value (25%) and the selected
paper output.
Note: Some features cannot be used with the Page Layout feature and will be grayed out on the
tou
ch screen.
The examples shown here are typical
outpu
ts that can be produced when using
the Page Layout feature.
Note: The practical limit is for
16 images on A4 (8.5 x 11 in.) paper.
1. On the Co
py tab, select the paper you want to use for the copies.
2. Select the Output F
ormat tab and then select Page Layout.
3. Select the required Page Layout option:
Pages per Slide
• Select the button that represents the required number
of images per page.
• Alternatively, select the Spec
ify Rows and Columns button and use the arrow buttons to
select 1–15 rows and columns.
• Select P
ortrait Originals or Landscape Originals from the drop-down menu on the right.
Repeat Image
• Select the button that represents the required number
of images per page.
• Alternatively, select the Spec
ify Rows and Columns button and use the arrow buttons to
select 1–15 rows and columns.
• Select P
ortrait Originals or Landscape Originals from the drop-down menu on the right.
•If Au
to Repeat is selected, the size of the original is used to automatically calculate the
maximum number of rows and columns that can be accommodated on the currently selected
paper size.
• To determine how the images are printed, select either Uprig
ht Images or Sideways images
from the drop-down menu on the right.
4. Select OK to
save the selections and run the job.
To Next Page
Loading...
Need help?
General
