Xerox CopyCentre C128 Quick Reference Guide

Fault Codes
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 Quick Reference Guide 143
047-216 An error occurred in the finisher. Contact the Xerox Welcome Center.
047-218 An error occurred in the Tandem Tray Module. Contact the Xerox Welcome
Center.
062-211
063-210
An error occurred in the document feeder. Contact the Xerox Welcome Center.
062-277 A communication error occurred between scanning and feeding components of
the machine. Contact the Xerox Welcome Center.
062-790 The scanned document is copy-prohibited. Refer to Illegal Copies in the Before
Using the Machine chapter on page 24 and verify the types of documents that
can be copied.
065-210
065-211
065-212
065-213
065-214
An error occurred in the machine. Contact the Xerox Welcome Center.
071-210
071-211
Tray 1 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
tray.
072-210
072-211
Tray 2 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
tray.
073-210
073-211
Tray 3 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
tray.
074-210
074-211
Tray 4 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
tray.
116-701 Double-sided printing is not possible due to insufficient memory. Add memory.
116-702 Printing was performed using a substitute font. Check the print data.
116-703 An error occurred during PostScript processing. Either confirm the print data, or
open spool settings on the details tab in the print driver to disable bi-directional
communication.
116-713 The job was printed out in parts because the hard disk ran out of space. Delete
unnecessary data.
116-720 An error occurred during printing due to insufficient memory. Close unused ports
or delete unnecessary data.
116-740 A numerical value operation error occurred because the print data contains a
value that exceeds the limit of the printer. Check the print data.
116-749 The print job was stopped because the specified font was not found. Install the
font or enable font replacement in the print driver.
Code Description and Remedy

Xerox CopyCentre C128 Specifications

General

Brand	Xerox
Model	CopyCentre C128
Category	All in One Printer
Language	English