Xerox Phaser 4500 - Page 9

(j)(3) Products which are
freestanding, non-portable, and
intended to be used in one
location and which have
operable controls shall comply
with the following: Where any
operable control is more than 10
inches and not more than 24
inches behind the reference
plane, the height shall be 46
inches maximum and 15 inches
minimum above the floor.
Not applicable The Phaser™ 4500 is a portable device and can be
placed on a table of any height.
(j)(4) Products which are
freestanding, non-portable, and
intended to be used in one
location and which have
operable controls shall comply
with the following: Operable
controls shall not be more than
24 inches behind the reference
plane.
Not applicable The Phaser™ 4500 is a portable device and can be
placed on a table of any height.
Criteria
Supportin
g
Features Remarks and explanations
(a) At least one mode of
operation and information
retrieval that does not require
user vision shall be provided, or
support for Assistive Technolo
g
y
used by people who are blind or
visually impaired shall be
provided.
Supports All areas requiring user interaction provide at least
one mode of operation and information retrieval
that does not require user vision.
(b) At least one mode of
operation and information
retrieval that does not require
visual acuity greater than 20/70
shall be provided in audio and
enlarged print output working
together or independently, or
support for Assistive Technolo
g
y
used by people who are visually
impaired shall be provided.
Supports No areas require visual user interaction with visual
acuity better than 20/70.
Section 1194.31 Functional Performance Criteria - Detail Voluntary Product Accessibility
Template
www.xerox.com/section508
Page 9 of 11
Last Revision: 4/2/2004