How to fix blurry colors or white area around objects on Xerox Phaser 6500 Printer?
If the colors are blurry or there is a white area around objects on your Xerox Printer, perform an automatic color registration adjustment because the color-to-color alignment is not correct.
Why are the printouts from my Xerox Printer faded or have multiple colors faded?
If your Xerox Printer produces faded printouts or multiple colors are faded, verify that the toner cartridges are Xerox toner cartridges and meet the printer's specifications; replace them if necessary. Ensure that the paper being used is within the recommended specification range; replace it if needed and confirm the control panel/print driver settings are correct. Also, check if the paper is damp and replace it if necessary. Finally, the transfer belt unit might be old or damaged, and replacing it may resolve the issue.
Why is my Xerox Phaser 6500 printing blank pages?
If your Xerox Printer is producing blank pages, remove the paper stack from the tray, fan it, then reinsert it to prevent multiple sheets from feeding at once. Verify that the toner cartridges are Xerox toner cartridges and meet specifications, replacing if necessary. Also, the transfer belt unit might be old or damaged and need replacement.
How to fix 'PDL Error' on Xerox Printer?
If your Xerox Printer displays 'PDL Error', an error relating to PCL emulation has occurred. Press the OK button to clear the message, cancel the current print job, and conduct the next print job, if any.
Why is my Xerox Phaser 6500 printing slanted?
If your Xerox Printer is producing slanted printing, reset the paper tray guides because the paper guides in the trays are not set correctly.
How to fix 'Load Tray Xxx' error on Xerox Phaser 6500 Printer?
If your Xerox Printer displays 'Load Tray Xxx', it means the printer has detected a paper size mismatch or no suitable paper is loaded in any of the trays. Open the specified tray, remove the paper, insert paper of the correct size, and then close the tray.
Why is the top section of my printed document missing from Xerox Phaser 6500 Printer?
If the top section of your printed document is missing or the top and side margins are incorrect on your Xerox Printer, ensure the paper tray guides are in the correct positions. Set the length guide and the width guides to the correct positions.
Why is my Xerox Printer printing stray black dots or white areas (dropouts)?
If your Xerox Printer is producing stray black dots or white areas (dropouts), replace the paper with a recommended size and type, and confirm that your control panel/print driver settings are correct if the paper is outside the recommended specification range. The transfer belt unit may be old or damaged and require replacement. Also, verify that the toner cartridges meet specifications and replace them if necessary.
How to fix 'Insert Output to Tray Xxx' error on Xerox Phaser 6500 Printer?
If your Xerox Printer displays 'Insert Output to Tray Xxx', it is waiting for side 2 to be set for manual 2-sided printing. Insert paper from the output tray into the specified tray for printing on the second side.
How do I resolve 'Jam at Tray 2' error on my Xerox Phaser 6500?
If your Xerox Printer displays 'Jam at Tray 2', it indicates that paper is jammed inside the paper tray. Open Tray 2 and remove the jammed paper.
Guidelines for safe electrical operation, including power cord usage and warnings about hazards.
Guidelines for safe operation, including handling, ozone release, and printer placement.
Precautions to take during printer maintenance procedures to ensure safety.
Step-by-step guide to the initial installation and setup of the printer.
Instructions for connecting the printer via USB or network cable.
Steps for setting up TCP/IP, IP addresses, and network configurations.
Procedures for installing print drivers for Windows, Macintosh, and Linux.
Detailed instructions for loading paper into various printer trays and the manual feed slot.
How to set up and print confidential documents securely.
Access to printer configuration settings via submenus like Network and System Setup.
Information on ordering consumables like toner and routine maintenance items.
Introduction to troubleshooting resources and common issues.
List and explanation of status and error messages displayed on the control panel.
Common printer issues like no power or failure to print, with solutions.
Guidelines for preventing and clearing paper jams from various printer locations.
General| Monthly Duty Cycle | Up to 40, 000 pages |
|---|---|
| Duplex Printing | Manual |
| Print Technology | Laser |
| Maximum Print Resolution | 600 x 600 x 4 dpi |
| First Page Out Time | As fast as 12 seconds |
| Connectivity | USB 2.0, Ethernet |
| Paper Capacity | 250 sheets + 1 sheet bypass tray |
| Supported Operating Systems | Windows, Mac OS, Linux |
| Print Speed | Up to 24 ppm (color) / Up to 24 ppm (black) |
To Next Page
