Xerox Phaser 6500 User Manual

Printing
Phaser 6500 Color Laser Printer
User Guide
55
Loading Paper in the 250-Sheet Feeder (Tray 2)
You can use the 250-sheet feeder for the following types of paper:
• Plain paper
•Letterhead
•Hole Punched
•Colored Paper
For supported paper sizes and weights, see Supported Paper on page 48.
Follow these guidelines to avoid problems during printing:
• Do not load different types of paper in the tray at the same time.
• To print high quality, use high-quality paper intended for laser printers.
• Do not remove or add paper to the 250-sheet feeder during printing. Doing so can cause a paper
jam. Remove the paper, align it with the new paper, and insert both into the tray together.
• Do not put any objects other than paper on the tray.
• Do not push or force down the tray.
• Always load paper short-edge feed first.
To load paper in the 250-sheet feeder:
1. Gently pull the paper tray out of the printer.
2. Open the output tray to hold the printed sheets.
3. Slide the paper width guides to the edge of the tray. Extend the width guides fully as shown in the
following illustration.
CAUTION: Do not remove the tray during printing because it can cause a paper
jam.
p6500-014

Xerox Phaser 6500 Specifications

General

Monthly Duty Cycle	Up to 40, 000 pages
Duplex Printing	Manual
Print Technology	Laser
Maximum Print Resolution	600 x 600 x 4 dpi
First Page Out Time	As fast as 12 seconds
Connectivity	USB 2.0, Ethernet
Paper Capacity	250 sheets + 1 sheet bypass tray
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	Up to 24 ppm (color) / Up to 24 ppm (black)