Xerox Phaser 6500 User Manual

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide
100
PostScript Setup Menu
Use this menu to configure settings for the PostScript driver. The PostScript driver of the printer is used
for applications requiring PostScript. For PostScript driver options, see Printing Options for Windows
PostScript Driver on page 62 and Printing Options for Macintosh OS X Version 10.5 or Later on page 65.
Item Description
PS Error Report Turns error reporting on or off.
The default is On.
PS Job Time-Out Turns off the timeout, or selects the length of time before timing out. The
default is Off.
The timeout allows the printer to stop working on the canceled job and
switch to another waiting print job when:
• A print job at the source computer by canceling before the job is
completed.
• The network connection is lost before the print job is completed.
Paper Select Mode Specifies how the printer handles tray switching when the selected tray
runs out of paper while printing. Tray settings in the PostScript print driver
can override this setting.
Default Color Specifies the default color mode:
• Color (default)
•Black

Xerox Phaser 6500 Specifications

General

Monthly Duty Cycle	Up to 40, 000 pages
Duplex Printing	Manual
Print Technology	Laser
Maximum Print Resolution	600 x 600 x 4 dpi
First Page Out Time	As fast as 12 seconds
Connectivity	USB 2.0, Ethernet
Paper Capacity	250 sheets + 1 sheet bypass tray
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	Up to 24 ppm (color) / Up to 24 ppm (black)