Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide
102
Tray Settings Menu
Use this menu to configure settings for each of the paper trays in the printer.
When the size or type of paper loaded is different from the setting, print quality can be reduced or
paper jams can occur. It can also cause paper to jam in the printer. Specify the correct paper type and
size.
When the optional 250-sheet feeder is installed, and the Paper Tray setting of the driver is set to Auto
Select:
• For the PCL driver, the printer uses the tray selected in the PCL Setup menu of the control panel. For
details, see Printing Options for Windows PCL Driver on page 63.
• For the PostScript driver, the printer uses the tray selected in the PostScript Setup menu at the
control panel. For details, see Printing Options for Windows PostScript Driver on page 62.
When the paper size and type settings for the trays are the same, printing is uninterrupted when the
paper runs out in the specified tray, printing is uninterrupted. Printing continues by changing to the
other tray when it is installed.
Tray 1 Settings
Item Description
Paper Type Specifies the type of paper loaded in the tray.
•Plain
•Bond
• Light Card
•Heavy Card
• LW Gloss Card
• HW Gloss Card
•Envelope
• Letterhead
•Hole Punched
•Recycled
• Colored
•Special
To Next Page
Loading...
Need help?
General