Xerox Phaser 6500 User Manual

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide
94
USB Setup Menu
Use this menu to configure the USB port.
Protocol When a protocol is set to Enable, it can be used. When set to Disable, it
cannot be used.
•LPR
• Port 9100
•IPP
•SMB TCP/IP
•SMB NetBEUI
•FTP
•WSD
•SNMP
• Email Alerts
• CenterWare Internet Services
•Bonjour (mDNS)
Host Access List Limits the IP addresses that can access this printer.
Reset Defaults Resets all network settings back to their factory defaults.
Adobe Protocol Specifies the PostScript communication protocol to use:
• Standard
•BCP
•TBCP
•Binary
•Auto
Item Description
Port Status Use to enable or disable the USB port status. This port must be enabled for
you to print to a USB-connected printer.
•Enable
•Disable
Adobe Protocol Specifies the PostScript communication protocol to use:
• Standard
•BCP
•TBCP
•Binary
•Auto
Item Description

Xerox Phaser 6500 Specifications

General

Monthly Duty Cycle	Up to 40, 000 pages
Duplex Printing	Manual
Print Technology	Laser
Maximum Print Resolution	600 x 600 x 4 dpi
First Page Out Time	As fast as 12 seconds
Connectivity	USB 2.0, Ethernet
Paper Capacity	250 sheets + 1 sheet bypass tray
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	Up to 24 ppm (color) / Up to 24 ppm (black)