Xerox Trimmer Module SquareFold User Manual

Problem solving
SquareFold Trimmer User Guide 13
Empty the Trimmer Waste Container.
6.
Ensure that the Trimmer Waste Container is completely
pushed in/closed.
Ensure that all covers on the SquareFold Trimmer Module are
closed.
7.
8.
5.
4.
Check for loose trim scraps along the paper path and remove
them.
Close the Top Left and Right Covers.
3.
Look for any jammed booklets within the SquareFold
Trimmer Module paper path and remove them.
If the SquareFold Trimmer Module Control Panel and/or the
machine’s UI indicate there is a still a jam, recheck the
SquareFold Trimmer Module (steps 1-8).
9.
If necessary, open the finisher to look for jams/faults along
the finisher path.
10.
Follow the instructions displayed on the machine’s UI to
resume printing/copying.
11.

Xerox Trimmer Module SquareFold Specifications

General

Brand	Xerox
Model	Trimmer Module SquareFold
Category	Printer Accessories
Language	English