Xerox Wide Format 6604 User Manual

RemedyCheckSymptoms
Load a correct type of media.
Refer to Media Type.
Is the correct type of media
used?
Media often jams,
is wrinkled or has
bent corners
(dogears).
Correctly load the media.
Refer to Loading Media.
Is the media loaded correctly?
Firmly push in the media tray until it stops.
Refer to Loading Media.
Is the media tray set up
correctly?
Replace with media from a new supply.
Refer to Loading Media.
Is the media damp?
Correctly set up the media size series and
the media type/thickness to match the
media that is loaded.
Refer to Media Settings.
Is the media loaded correctly
and are the media settings
correct?
Open the Front Doors or pull out the media
trays to remove the torn media or the
foreign object.
Refer to Loading Media.
Have you checked for torn
pieces of media or foreign
objects in the machine?
Clean the Contact Image Sensors (CIS)
and the main roller, followed by the
Scanner Setup (Normalization) procedure.
Refer to the Maintenance chapter for
details.
Have you cleaned the Scanner
areas as a daily maintenance
tasks?
The copy is dirty.
Adjust the copy density, image quality, or
background suppression.
Refer to Original Type, Copy Density, and
Background Suppression.
Is the document printed on
colored media, rough media, or
blueprint media?
Rotate the document 90 degrees.
Clean the Scanner Contact Image Sensors
(CIS) and the Main Roller, followed by the
Scanner Setup (Normalization) procedure.
Refer to the Maintenance chapter for
details.
Have you cleaned the Scanner
areas as a daily maintenance
tasks?
The copy has black
lines.
Adjust the copy density.
Refer to Copy Density.
Is the copy density set to
Darken?
The copy is too
dark.
Rotate the document 90 degrees.
Xerox
®
Wide Format 6604/6605 Solution
™
8-4
User Guide
Problem Solving

Xerox Wide Format 6604 Specifications

General

Brand	Xerox
Model	Wide Format 6604
Category	Printer
Language	English