Xerox WORKCENTER 5222 - Page 19

dc08cc0440
Customer Support Page 19
Feature Implementation Values
Media Class <</MediaClass (string)>>
setpagedevice
Where string is one of the following or null*:
stationary = Plain
used = Plain Reload
recycled = Recycled
transparency = Transparencies
thin = Lightweight (56-63g/m2)
label = Labels
thick1 = Heavyweight 1 (106-169g/m2)
thick2 = Heavyweight 2 (170-216g/m2)
user1 = Custom 1
user2 = Custom 2
user3 = Custom 3
user4 = Custom 4
user5 = Custom 5
holed = Punched
letterhead = Letterhead
preprinted = Pre-Printed
other = Other
fine thick2 = Bond
envelope = Envelope
Media Type <</MediaType (string)>>
setpagedevice
Where string is any value or null*.
(MediaType will not affect any tray
selection.)
Media
Selection
<</DeferredMediaSelection
value>>
setpagedevice
Where value is one of the following:
true* = Deferred media selection by
output device (more powerful and flexible
media selection)
false = Immediate media selection by
strict setpagedevice operator
To select the appropriate media when
using MediaClass / Staple / Punch feature,
value must be set to true intentionally in the
beginning of header.
Resolution <</HWResolution [x y]>>
setpagedevice
Where x and y are one of the following:
600 600*(dpi)
1200 1200
Duplex <</Duplex value>>
setpagedevice
Where value is one of the following:
true = Duplex
false* = Simplex
Tumble <</Tumble value>>
setpagedevice
This feature is effective only in conjunction
with that Duplex is true
Where value is one of the following:
true = Tumble (Short edge binding
Duplex)
false* = Duplex (Long edge binding
Duplex)