3
• Delete Job Confirmation – Allows a user or System Administrator to confirm deletion of a job other than an Internet
Fax job from an active (incomplete) job queue. Is accessible by selecting the {Job Status} hard button on the machine,
selecting the desired job from the displayed Job Queue and then selecting the ‘Delete’ button from the displayed Job
Status Job Monitor window.
• Pausing an active job being processed by the device – Allows the user to pause an active scan or print job while it is
being processed by the WorkCentre™ 5030/5050. Is accessible by selecting the ‘Stop’ machine hard button while a job
is being processed by the device. Depending on the type of job being processed by the device, one of the following
Pause windows will be displayed as appropriate to allow the user to determine whether to delete or continue
processing of the job: Scanning Pause window, Printing Pause window, Scanning/Printing (Two Jobs) Pause window,
Resume Marking/Incomplete Scan Job Pause window, Marking/Scanning Job Pause window, Build Job/No
Marking Pause window, Build Job/ Marking Pause window, Build Job Sample Printing/ One Segment Scanned
Pause window or Build Job Sample Printing/More Than One Segment Scanned Pause window.
• Job Details (Completed Jobs) - Allows a user to view the details of a selected completed job. Is accessible by (1)
selecting the {Job Status} hard button on the machine, (2) selecting the {Other Queues} button on the displayed Job
Queue window, (3) selecting the desired Completed job queue from the three such “Completed” job queues available,
and then finally (4) selecting the desired job from the displayed “Completed” Job Queue window.
14. The following page is available from the Web User Interface to a WorkCentre™ 5030/5050 with System Administrator
login and authentication. This page provide standard system configuration capability:
• Image Settings - Allows the System Administrator to determine what TIFF JPEG Compression version to use. Is
accessible by selecting the General Setup -> Image Settings tabs from the Properties Content Menu.
15. The following page is available from the Web User Interface to a WorkCentre™ 5030/5050 with no System Administrator
login and authentication required:
• Index – Provides a user with hyperlink pointers to each Web User Interface screen. Is accessible by selecting the Index
button on the top of every Web User Interface page.
16. The following Special Purpose pages are available from the Web User Interface with System Administrator login and
authentication: These pages provide additional system configuration capability as follows:
• Exported Scan Files - Allows the setting of the PDF encoding format for scanned files. Is accessible by typing
http://{IP Address}
5
/diagnostics/index.dhtml and then selecting ‘Exported Scan Files’ from the Diagnostics Content
Menu.
• Raw TCP/IP Printing - Allows the user to enable/disable and modify several attributes for Raw TCP/IP Printing. Is
accessible by typing in either (1) http://{IP Address}
5
/diagnostics/index.dhtml and then selecting [Raw TCP/IP
Printing] from the Diagnostics Content Menu or (2) http://{IP Address}
5
/diagnostics/rawhidden.dhtml.
• LDAP - Allows the user to set desired LDAP Server search filters. Is accessible by typing http://{IP
Address}
5
/diagnostics/ldapFilter.dhtml or by typing http://{IP Address}/diagnostics/index.dhtml and selecting
[LDAP] from the Diagnostics menu.
• Sever Fax Edge Erase - Allows the user to set the desired border edge erase value for a Server Fax job. Is accessible by
typing http://{IP Address}
5
/diagnostics/index.dhtml and then selecting ‘Server Fax Edge Erase’ from the
Diagnostics Content Menu or by typing http://{IP Address}
5
/diagnostics/serverfaxedgeerase.dhtml.
• LPR/LPD - Allows the user to enable or disable PDL switching over LPR/LPD. Is accessible by typing http://{IP
Address}
5
/diagnostics/ lprlpdhidden.dhtml.
• Secure Print Release All - Allows the user to release all of the user’s secure print jobs at one time with the same user
name and password. Is accessible by typing http://{IP Address}
5
/diagnostics/ secureReleaseAll.dhtml.
• Secure Attribute Editor - Allows the user to change some system attributes related to PDLs (e.g., memory usage,
copies per page, etc.). Is accessible by typing http://{IP Address}
5
/diagnostics/ secureattr.dhtml.
• Filing Cabinet - Allows the user to enable the use of Network scanning filing cabinets. Is accessible by typing
http://{IP Address}
5
/diagnostics/filing_cabinet.dhtml.
• DLM Maker - Allows the user to create a DLM out of any file. Is accessible by typing http://{IP
Address}
5
/diagnostics/DLMMakerdhtml.
5
{IP Address} is the IP address of the machine
To Next Page
Loading...
