Getting Started
WorkCentre
®
5845/5855/5865/5875/5890 33
Getting Started Guide
Office Finisher
• Holds up to 250 sheets of paper in the Top Tray, and up to 2000 sheets in the Stacker Tray.
• Paper weight 60 to 216 gsm (16 to 57 lb).
• The Office Finisher can collate, stack, staple and hole punch (if available) your output depending
on the features selected. It staples between 2 and 50 sheets of 80 gsm (20 lb) paper, less if using
heavyweight paper or tabs.
• The finisher stapler has 1 staple cartridge containing 5000 staples.
• This finisher can be fitted with the optional 2, 3 or 4 Hole-Punch kit.
Office Finisher with Booklet Maker
• Holds up to 250 sheets of paper in the Top Tray, and up to 2000 sheets in the Stacker Tray.
• Paper weight 60 to 216 gsm (16 to 57 lb).
• The booklet maker can collate, stack, staple and hole punch (if available) your output depending
on the features selected. It staples between 2 and 50 sheets of 80 gsm (20 lb) paper, less if using
heavyweight paper or tabs.
• The finisher stapler has 1 staple cartridge containing 5000 staples.
• This finisher can be fitted with the optional 2, 3 or 4 Hole-Punch kit.
• The booklet maker can staple and fold up to 15 sheets of 80 gsm (20 lb) paper.
High Volume Finisher
• Holds up to 250 sheets of paper in the Top Tray, and up to 3000 sheets in the Stacker Tray.
• Paper weight 60 to 216 gsm (16 to 57 lb).
• The High Volume Finisher can collate, stack, staple and hole punch (if available) your output
depending on the features selected. It staples between 2 and 100 sheets of 80 gsm (20 lb) paper,
less if using heavyweight paper or tabs.
• Use the Pause button on the top of the finisher to pause printing and unload the output tray. Press
the button again to resume.
• The finisher stapler has 1 staple cartridge containing 5000 staples.
• This finisher can be fitted with the optional 2, 3 or 4 Hole-Punch kit and the Tray 6 (Post Process
Inserter) kit.
• The High Volume Finisher is also available with a Booklet Maker which enables booklets to be
folded and stapled. Folded sheets and booklets are delivered to the booklet tray which can hold
between 10 and 30 booklets, depending upon the number of pages. If the flap on the right of the
tray is folded down, an unlimited number of booklets can be collected in a suitable container.
• If you have a High Volume Finisher with Booklet Maker, a Tri-fold module can also be fitted. This
enables your device to produce tri-folded output. With the Tri-fold module fitted, the capacity of
the finisher stacker tray is reduced to 2000 sheets and a maximum paper weight of 120 gsm (32lb).
To Next Page
Loading...
Need help?
General
