Getting Started
WorkCentre
®
5845/5855/5865/5875/5890 35
Getting Started Guide
Power On and Off
Powering the Device On
1. Ensure that your device is connected to a suitable power supply and that the power cord is fully
plugged in to the electrical outlet of the device.
2. Press the Power button. The entire powering on process (to power on all installed options) takes less
than 3 minutes 50 seconds.
Powering the Device Off
Power Off ends the current session and turns off the device.
1. Press the Power button on the control panel.
2. Select the Power Off button on the touch screen.
3. Select the Power Off button again to confirm that the device should power off.
Note: Confirming power off will result in the deletion of any jobs currently in the queue. If Cancel
is selected the power off option will be cancelled, the device will be available for use and any jobs
currently in the queue will be retained.
The device will begin a controlled power down sequence. It remains on for approximately 36 seconds
before switching off.
To Next Page
Loading...
Need help?
General
