Xerox WorkCentre 5855 Getting Started Guide

Getting Started
WorkCentre
®
5845/5855/5865/5875/5890 71
Getting Started Guide
Maintenance and Consumables
Identifying the Replaceable Units
There are several consumables on the device that need replenishing or replacing, such as paper, staples,
and customer replaceable units.
1. Toner Cartridge
2. Xerographic Module
3. Fuser Module
4. Waste Toner Bottle
5. Ozone Filter
The device will display a message on the touch screen when any of the units need to be re-ordered. This
message is a warning that the unit is nearing the end of its life. Only replace the unit when a message
actually instructs you to do so.
WARNING: When replacing consumables do NOT remove the covers or guards that are fastened
with screws. You cannot maintain or service any of the parts that are behind these covers and
guards. Do NOT attempt any maintenance procedure that is NOT specifically described in the doc-
umentation supplied with your device.
Cleaning the Document Glass and Constant Velocity Transport Glass
To ensure optimum print quality at all times, regularly clean the glass areas of your device. This helps
avoid output with streaks, smears and other marks that may transfer from the glass area when scanning
documents.

Xerox WorkCentre 5855 Specifications

General

Print Resolution	Up to 1200 x 1200 dpi
Standard Paper Capacity	1, 100 sheets
Duplex Printing	Yes
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Functions	Print, Copy, Scan, Fax
Processor	1.2 GHz
Memory	2 GB
Hard Drive	160 GB
Scan Resolution	Up to 600 x 600 dpi
Type	Laser
Print Speed (Color)	Up to 55 ppm
Copy Resolution	Up to 600 x 600 dpi
Print Speed	Up to 55 ppm
Copy Speed (Black)	Up to 55 ppm
Dimensions	640 x 670 x 1118 mm
Scan Speed	Up to 70 ipm (black and white / color)