Troubleshooting
WorkCentre 7500 Series Multifunction Printer 219
User Guide
6. Return lever 2b to its original position.
7. Close the front door of the finisher.
Clearing Jams at 3 in the Finisher
1. Open the front door of the finisher.
2. Pull down green lever 3.
3. Carefully remove the jammed paper.
Note: If the paper is torn, remove all torn pieces from the finisher.
4. Return lever 3 to its original position.
5. Close the front door of the finisher.
To Next Page
Loading...
