XEV YoYo 2021 - Page 41

33
Within the operating distance of the
remote key, shortly press the unlock
key on the remote control key once to
unlock all the doors, and the left and
right turn signal ashes for 2 times to
exit the fortied state.
When ACC is “ON”, the remote control is
invalid
* keyless entry control
When the start switch is in the “OFF”
position and the door is locked, the user
presses the micro switch on the handle
of the door with the smart key within 1.5
meters from the door to unlock the two
doors and the turn signal ashes once.
When the start switch is in the “OFF”
position and the door is fully closed and
unlocked, the user carries the smart key
within 1.5 meters from the door and presses
the micro switch on the door handle to close
the door, and the turn signal ashes twice.
Remote learning function
Learning steps for the remote control:
small light on - o - on - press the brake
pedal twice, and the two keys learn
successively. Press the unlock and lock
buttons simultaneously while learning.
After learning successfully, the double
ashing indicator on the central control
screen ashes once.After learning
successfully, press the brake pedal
or turn o the small light to exit the
learning mode
Charging
device
Lighting
device
Vehicle
device
Emergency
treatment
Technical
information
Instrument &
control devices
Safety
device
Starting &
driving
Repair &
maintenance