47
1. The starting switch is in the state of “ON”,
pull the light switch handle forward, and
the turn signal ON the right side of the car
ashes.
2. Light switch handle automatically return
to position, turning signal o; You can also
manually reset the light switch.
3. Move the light switch handle forward
or backward, and the turn signal will light
up. When the steering wheel returns to the
straight driving position, the light switch
handle will automatically return to the
position and the turn signal will go out; the
light switch can also be reset manually.
The starting switch is in the state of “ON”,
press down the brake pedal, and the brake
lamp is ON.
Turning lights Brake lights Reversing light
Charging
device
Lighting
device
Vehicle
device
Emergency
treatment
Technical
information
Instrument &
control devices
Safety
device
Starting &
driving
Repair &
maintenance
To Next Page
Loading...