XF ROBOT Z-2Mini - Page 7

NANJING XIANFEI ROBOT TECHNOLOGY CO., LTD.
1
Z-2 User Manual
Carries an AI-ISP 4K full-color night vision camera and a thermal camera.
Features AI multi-object detection and tracking, which can constantly track
one of the persons and vehicles intelligently identi󽗉ed in the image.
Micro 3-axis nonorthogonal mechanical stabilized structure reducing the
weight down to 110g.
Supports network, UART and S.BUS control and compatible with both private
protocol and MAVLink protocol. Support image transmission through network
and HDMI.
Thanks to the Dual-IMU complementary algorithms with IMU temperature
control and carrier AHRS fusion, the gimbal provides a stabilization accuracy
at ±0.01° .
Can be mounted onto multiple carriers, whether downward or upward.
With the Dragon󽗊y software, user can watch the image and control the pod
without protocol ducking.
Photos and videos can be downloaded online through the "Gallery" function
of the Dragon󽗊y software.
With the customized QGC software, all the functions of the pod can be
achieved in conjunction with an open source autopilot.
Screen supports overlaying OSD information such as latitude, longitude and
altitude. Image supports shooting point coordinate EXIF save.
10~26.4 VDC wide voltage input.
Synopsis
Introduction
The Z-2Mini Intelligent 4K Full-Color Night Vision Dual-Sensor Micro Pod carries a 4K
resolution camera empowered with the AI-ISP full-color night vision imaging engine,
which can provide a good full-color night observation performance even in extremely
low-light environments such as night time or con󽗉ned spaces. The Z-2Mini also features
a long-wave infrared thermal camera, which can capture thermal images. The Z-2Mini
has AI multi-object detection and tracking function. The pod can intelligently identify
the persons and vehicles in the image, and constantly tracking one of them.
With a high accuracy 3-axis nonorthogonal gimbal, the Z-2Mini can be mounted
whether downward or upward. With the Dragon󽗊y software, users can watch the image
from the camera and control the pod real-timely on a computer. With the customized
QGC software, all the functions of the pod can be achieved in conjunction with an open
source autopilot.
Characteristics