turning off if the( )or( ) icon is not displayed
Short press (ALARM A) or (ALARM B), and the alarm will be
( ) ( ) respectively displays the alarm enabled
Short press the (ALARM A) or (ALARM B) key, and the icon
them respectively with the [TUNING] button
4.Input (hour) and (minute) with the number keys or adjust
3.Long press the (TIME) key, and the clock will flash
2.The time can be adjusted in the on/off state
set the 12/24 time system
1.Under the shutdown state, long press the number(3)key to
turn off the sleep shutdown setting
Select to turn ( ON ) the machine function again, and then
seconds for automatic confirmation
to select the boot time [01-120] minutes, and then flash for 3
press the (SLEEP) key continuously or turn the (TUNING) key
Short press the(SLEEP)key briefly, the ( ) icon flashes,
backlight on, and then press and hold again to turn it off
Press and hold the(BW/ )key for a long time to keep the
then turn off
Press any button in any state to light up for 5 seconds and
Cancel (SLEEP) shutdown function
Press the (POWER) key to (ON)
Switch (ALARM)
Display backlight switch
Sleep timed shutdown mode
Set clock
Alarm and timed power on function
9.
To Next Page
Loading...
