XHDATA D-109 - MP3 and Bluetooth Functions; MP3 Playback Controls; Bluetooth Operations

5. Long press and hold this key icon to display, which
radio frequency number
(timed boot time)alarm A and alarm B,(local time)and memory
can be switched to [signal strength/signal-to-noise ratio] value,
repeatedly and briefly, the display area on the upper right corner
can be switched to [signal strength/signal-to-noise ratio] value,(timed boot
When using the radio function: Short press the( )key
2.Long press again to reconnect the device
for 2 seconds to disconnect the current device.
1.When Bluetooth is connected, long press button( )
press once to end the call
briefly press ( ) to answer the call, and then briefly
When there is a phone call in Bluetooth connection status,
to select a song or directly select songs on your mobile phone
3.Short press( ) or ( ) key and turn the [TUNING] button
( )
and connect, and the successful connection is displayed
phone, search the Bluetooth connection name ( D-109 )
2.Open the Bluetooth connection interface of the mobile
1.Short press( )key to enter Bluetooth playing status
Press key(B) again to play again at point A/B
When MP3 player is playing, press key(SCAN) briefly to display(A)
for all song areas
icon ( )again to turn off, which is a cycle playback mode
Bluetooth forced disconnection
Wireless call
Music playing
is a single song cycle playback mode.Press and hold the
6.A/B point repeat function:
Display content switching
Bluetooth function operation
8.