XHDATA D-109 - Memory Station Operations; Manual and Automatic Memory; Accessing Saved Stations

Search for memor
y
stations
1. Manual memory station(VF)
2. Fully automatic scanning memory
Select the preferred band
Select radio frequency to memory
Short press (MEMORY) key, radio station code flashes in the
upper right corner
Press the (MEMORY) key again to remember
Select band
Long press the corresponding band key to automatically scan
and memorize the radio frequency
Two modes of shortwave automatic search
Long press the (SW -) key for 3 seconds for the full meter band
— Tips —
Long press the (SW +) key for 3 seconds as the current meter
search memory mode
Band search memory mode
1. After the station search is completed, you can enter the memory
Access memory radio station(VM)
The radio signal will be affected by such factors as season/time period/weather,
receiving environment,electromagnetic interference and receiving antenna angle and
azimuth. Therefore, ATS memory should be updated frequently
Radio mode or press the (VM) key briefly
2. Turn the (TUNING) button to switch the memory radio frequency
3. Input the frequency number of the memory station directly with
the number keys
5.