XHDATA D-109 - Memory Management; Deleting Memory Stations

Delete memory station method
Auto scan memory radio frequency(VM)
1.Select band, short press(VM) key, press and hold the(SCAN) key
Select Delete Memory Station
for 3 seconds to enter the automatic browse mode
2.Scan each memory radio station number for 5seconds,and short
press the SCAN key briefly to select listening. No action, continue
to scan the address number of the next radio station
1. Short press the (VM) key to enter the state of retrieving memory
station
2.Select band
3.Turn the (TUNING) button to select the radio station number
to confirm the deletion
[ALL] flash, and then press and hold the (BT) key for 3 seconds
the deletion of all
2. Press and hold the (DELETE) key for 3 seconds until [DEL] and
display (ALL), release it and press it briefly again to confirm
1. Turn off a machine
3. Press and hold the (DELETE) key until the sub display area
2. Select band
station
1. Short press the (VM) key to enter the state of retrieving memory
short press again to confirm deletion
Delete all memory radio frequencies
4.Long press(DELETE) key for 3 seconds to display [DEL], and
Delete all memory stations of the current band
frequency to be deleted
6.