How to Use the Charging Function
Normal charging operation
When the machine's power display ( ) is low or the battery
is exhausted ( ), please charge it immediately
Connect one end of the USB charging cable to the DC5V_USB output
adapter, and plug the other end into the local (TYPE-C) jack [the adapter
output is DC5V (≥ 1A)] to charge the machine. The display shows ( )
charging symbol flashing
When the icon ( ) is displayed, the charging symbol ( ) will not
flash, indicating that it is fully charged.
Solar charging operation
Simply point the solar panel of the device directly towards the sun to charge the
device in an emergency.
Hand crank emergency charging operation
Pull out the machine's rocker arm and rotate the rocker arm to charge the
machine in an emergency.
Tip
In order to avoid interference during charging and insufficient charging
current, which may cause automatic shutdown and longer charging time,
please do not use the machine in the early stages of charging.
To Next Page
Loading...
