Xiaomi 1S Set - Page 4

3
Loading 3" Sticky-backed Photo Paper
1
Pull the paper tray holder open.
2
Rotate the holder vertically till it
snaps to the paper tray boom.
3
Open the paper tray cover.
4
Load the 3" sticky-backed photo
paper into the slot of the 3" paper
holder with the glossy side facing
up.
Note: The printer may not feed paper if
more than 10 sheets of 3" sticky-backed
photo paper are loaded.
Note: Make sure the 3" paper holder
is in the paper tray.
6
Close the paper tray cover.
Load photo paper into the paper
tray with the glossy side facing up.
5
Note: The printer may not feed paper if
more than 20 sheets of 6" photo paper
are loaded. Do not touch the area within
the cuing lines of the photo paper.
5
Close the paper tray cover.
Note: The 3" sticky-backed photo paper is sold separately.